Antenna
attiva HDLA 10 kHz a 55 MHz
Supply Voltage: 12-14V, Supply Current: Approx. 220 mA.
The loop is remote-fed through the coaxial cable.
Usable Frequency Range: 10 kHz - 50 MHz,
the upper end is limited by the FM trap.
Output Impedance: 50 Ohm
Maximum Output Voltage: Approx. 8 Vss
Output Intercept Points:
Measured with two test frequencies of 5 and 5,2 MHz at -3 dBm output power at a 50 Ohm load,
output voltage = 150 mVeff = S9+70dB:
IP2 > 90 dBm
IP3 @ 4,8 & 5,4 MHz = 37 dBm
The loop is remote-fed through the coaxial cable.
Usable Frequency Range: 10 kHz - 50 MHz,
the upper end is limited by the FM trap.
Output Impedance: 50 Ohm
Maximum Output Voltage: Approx. 8 Vss
Output Intercept Points:
Measured with two test frequencies of 5 and 5,2 MHz at -3 dBm output power at a 50 Ohm load,
output voltage = 150 mVeff = S9+70dB:
IP2 > 90 dBm
IP3 @ 4,8 & 5,4 MHz = 37 dBm
Versions - Versioni
The antenna is available in 4 versions - L'antenna è disponibile in 4 versioni
The antenna is available in 4 versions - L'antenna è disponibile in 4 versioni
To order the antenna - Per
ordinare l’antenna
La foto della antenna e della mia website http://www.fenu-radio.ch.
RispondiEliminaHo dimenticato di scrivere questo.... :-((
Saluti da Fenu