http://store.redpitaya.com/hamlab.html
- Red Pitaya V1.1. board
- very nicely designed box
- connectors for microphone, headphones, antennas, BNC connectors for Oscilloscope &Signal Generator, Logic Analyzer connector...
- 10W nominal output power
HAMLAB can be used as (please see the specs bellow):
- SDR Transceiver
- Oscilloscope
- Signal Generator
- Spectrum Analyzer
- Logic Analyzer
SDR specifications
Please find more info on the following link:
Receiver Architecture: direct sampling
Wideband Freq. Coverage: 0-60 MHz
RX Channels: 2
TX Channels: 2
Transmit Freq. Coverage: 80-10m amateur bands
Output power: 10W nominal
Preamplifiers/Attenuators: not available at the moment. Possibility of purchasing them later (are in development and will be available soon at an affordable price)
Required power supply: 12V/20A; not included in the price
Data transfer: Gigabit Ethernet, WIFI
Compatible with Power SDR, HDSPR, Gqrx, GNU Radio, GNU Radio Companion and Pothos
Oscilloscope specifications:
Input channels: 2
Bandwith: 50 MHz
Sampling rate: 125 Msps
Input range: +- 20V
Resolution: 14 bit
Imput impedance: 1MΩ/10pF
Oscilloscope probes: included
Works with Linux, Windows and MAC
Spectrum Analyzer Specifications:
Input channels: 2
Bandwith: 62 MHz
Dynamic range: 80dBm
Input noise level:<-119dBm/Hz
Works with Linux, Windows and MAC
Logic Analyzer Specifications:
Input channels: 8
Protocol decoders: SPI, UART, I2C
Sample rate: 125Msps
Logic levels: 2.5V/3.3V/5V
Probes: included
Works with Linux, Windows and MAC
